Döküm Talaş Kırıcı Geometrileri

The Working Conditions of Turning Inserts

Workpiece material	Geometry		Working Condition
			Continuous	Light Interrupted	Interrupted
K	Negative	UK	GK1115	GK1115/GK1120	GK1125/GK1130
		HK	GK1115	GK1115/GK1120	GK1125/GK1130
		Flat	GK1115	GK1115/GK1120	GK1125/GK1130
	Positive	GP	GK1115	GK1115/GK1125	GK1125
		KM	GK1115	GK1115/GK1125	GK1125

Features of Turning Inserts
Turning Inserts（Negative)

Geometry	Features	Application Range	Cross Section Geometry
UK	• UK for machining cast iron. • Medium cutting for general conditions.
HK	• HK for cast iron heavy cutting. • Strong cutting edge and wide land for improved performance.
None	• Without chipbreaker. • Flat-top. • Stable placement. • Strong edge design for intermittent cutting conditions.

Geometry	80° Rhombic	55° Rhombic	90° Square	60° Regular Triangle	35° Rhombic	80° Trigon
UK
	CNMG-UK	DNMG-UK	SNMG-UK	TNMG-UK	VNMG-UK	WNMG-UK
	P026	P030	P033	P036	P038	P040
HK
	CNMG-HK	DNMG-HK	SNMG-HK	TNMG-HK	VNMG-HK	WNMG-HK
	P026	P030	P033	P037	P038	P040
None
	CNMA	DNMA	SNMA	TNMA		WNMA
	P027	P030	P034	P037		P040

Features of Turning Inserts
Turning Inserts（Positive)
5° Clearence Angle

Geometry	Features	Application Range	Cross Section Geometry
GP	• GP for light cutting of general steel, alloy steel,stainless steel and cast iron. • Strong tool nose due to flat cutting edge and sharp cutting edge due to double rake angle. • Steady chip control when the depth of cut is less than 1mm due to Peninsula-shaped chip breaker.
KM	• KM for Semi-finishing and roughing of general steel, alloy steel and cast iron. • Variable land design, combine sharpness with fracture resistance. • Large shallow groove design, smooth cutting, easily evacuate chips.

Geometry	80° Rhombic	55° Rhombic	90° Square	60° Regular Triangle	35° Rhombic	80° Trigon
GP
					VBMT-GP
					P052
KM
					VBMT-KM
					P052

Features of Turning Inserts
Turning Inserts（Positive)
7° Clearence Angle

Geometry	Features	Application Range	Cross Section Geometry
GP	• GP for light cutting of general steel, alloy steel,stainless steel and cast iron. • Strong tool nose due to flat cutting edge and sharp cutting edge due to double rake angle. • Steady chip control when the depth of cut is less than 1mm due to Peninsula-shaped chip breaker.
KM	• KM for Semi-finishing and roughing of general steel, alloy steel and cast iron. • Variable land design, combine sharpness with fracture resistance. • Large shallow groove design, smooth cutting, easily evacuate chips.

Geometry	80° Rhombic	55° Rhombic	90° Square	60° Regular Triangle	35° Rhombic	80° Trigon
GP
	CCMT-GP	DCMT-GP	SCMT-GP	TCMT-GP	VCMT-GP	WCMT-GP
	P042	P045	P046	P049	P053	P055
KM
	CCMT-KM	DCMT-KM	SCMT-KM	TCMT-KM	VCMT-KM
	P042	P045	P046	P049	P053

Features of Turning Inserts
Turning Inserts（Positive)
11° Clearence Angle

Geometry	Features	Application Range	Cross Section Geometry
GP	• GP for light cutting of general steel, alloy steel,stainless steel and cast iron. • Strong tool nose due to flat cutting edge and sharp cutting edge due to double rake angle. • Steady chip control when the depth of cut is less than 1mm due to Peninsula-shaped chip breaker.

Geometry	80° Rhombic	55° Rhombic	90° Square	60° Regular Triangle	35° Rhombic	80° Trigon
GP
	CPMT-GP CPGT-GP		SPMT-GP	TPMT-GP
	P043		P047	P051